Bangladesh vs West Indies Second Test: Sylhet Dates and Scorecard Guide

Bangladesh's second Test against West Indies is scheduled for 5-9 November 2026 in Sylhet, according to the ICC's published series itinerary. The first Test was scheduled in Mirpur from 28 October to 1 November. The ICC's subsequent squad update records Bangladesh going into the second match 1-0 down in the series.

If you searched for West Indies versus Bangladesh, first check which match and format your scorecard represents. This guide identifies the second Test, explains the confirmed squad context and shows how to read innings, leads, wickets and an ongoing result. It does not present an unverified live score or a prediction as a completed outcome.

Which Bangladesh versus West Indies match is this?

The relevant fixture is the second and final Test of the two-match series, scheduled in Sylhet from 5 November. It is part of the World Test Championship cycle. The senior Test fixture should not be confused with a limited-overs match, a women's fixture or a youth game involving the same countries.

The itinerary is a schedule, while a live scorecard records what has happened during play. They answer different questions. A fixture being scheduled for five dates does not mean that five full days have already been played or that the match must necessarily last until the final scheduled date.

Information here was checked on 5 November 2026. For the current toss, playing elevens and score, use the official board or competition-linked match service. Those details can change or become available after a preview is written. There is no value in filling a missing score with a guessed number.

The two-Test series at a glance

The ICC's 1 November squad update says Bangladesh are 1-0 down going into the second match. That is the series position at that point, not the second Test's score. A series figure such as 1-0 counts match wins, while an innings figure such as 125-3 counts runs and wickets.

The second Test is therefore important for the series outcome. Bangladesh need a win to level a two-match series from that position. A drawn second match would preserve the existing one-match advantage for West Indies. Those are conditional consequences, not a claim that either outcome has occurred.

What the confirmed squad update says

The ICC reported Mominul Haque unavailable after a head injury in the first Test and identified Amite Hasan as his squad replacement. Its account also explains the applicable concussion stand-down context. That is a published selection update, not a diagnosis made by this website or an instruction for an injured reader.

A squad is the group selected for the match, while the playing eleven is the side named to take the field. Being added to a squad does not automatically establish that a player starts. Check the official team announcement before writing a batting order or treating a reserve as a confirmed participant.

The same distinction applies to fitness. A report that someone is unavailable for this fixture should not be expanded into a prediction about an entire career or a precise return date unless the responsible source provides it. Keep the scope of an injury or selection statement tied to what has actually been announced.

Why an innings score has two parts

In a familiar score such as 125-3, the first number is the batting side's runs and the second is wickets lost. It does not mean the side has scored 125 goals or that the opposition has three runs. Read the innings label to identify which team is batting.

Some services display the same information in a different order or use a slash instead of a hyphen. The labels remain essential. A score of 3 for 125 in one display can represent the same innings state as 125 for 3 in another. Do not compare bare numbers without checking the convention.

Also check whether the innings is ongoing, all out or declared. A total followed by a declaration marker represents a captain ending an innings voluntarily under the rules, not necessarily the loss of every wicket. That status affects how the match proceeds and how the next innings should be read.

Test cricket allows a longer sequence than one innings each

Unlike an ordinary one-innings limited-overs comparison, a Test can involve two innings per side. The first completed batting total is therefore not automatically the final target. Read the full sequence of innings and any match-status explanation before deciding who is ahead.

For example, if an imaginary first innings ends at 250 and the opponent replies with 220, the first side has a 30-run first-innings lead. That lead is one part of the match state. The next innings can increase, reduce or reverse the advantage depending on how the game develops.

These invented figures explain the arithmetic only. They are not scores from the Sylhet Test. Keep worked examples clearly separate from match reporting so that a learner does not accidentally repeat an exercise total as a current result.

A lead is not the same as a target

A lead compares the runs accumulated by the two teams at a particular stage. A target is the total required to win in a completed chase situation. The two ideas are connected, but they are not interchangeable labels for any number shown below a scorecard.

Suppose one side has a first-innings lead of 30 and then adds 170 in its second innings. Its overall lead becomes 200. If the opponent is then beginning a final chase under those conditions, it needs 201 to finish with more runs. The extra one matters because matching the total is different from exceeding it.

Always follow the scorecard's current target and status when describing a real match. Declarations, forfeitures or other rule situations can change the sequence you expected. A tutorial example should help you understand the display, not encourage you to override the official match state with an assumption.

Overs notation is not an ordinary decimal

An over normally contains six legal balls. A display of 20.3 overs means twenty completed overs and three additional legal balls, not twenty point three overs in ordinary decimal arithmetic. The number after the dot counts balls within the over.

To convert that example to legal deliveries, calculate twenty times six plus three: 123. A display of 20.5 is 125 legal deliveries, and the next legal ball completes the over at 21.0. Treating 20.5 as twenty and a half would produce the wrong ball count.

Wides and no-balls add complications because not every delivery advances the legal-ball count. When checking a bowler's economy or the number of balls faced, use the scorecard's defined categories. A simple division based on a misunderstood overs notation can create a confident but incorrect statistic.

West Indies batting against Australia at the Gabba in January 2024; an archival Test-cricket illustration, not this Bangladesh fixture.

A batter's runs need context

Read runs alongside balls faced, dismissal status and the innings situation. A score marked not out means the batter had not been dismissed when that innings entry ended. It should not be described as an ordinary dismissal simply because the team's innings later closed.

A patient innings can have value in a Test even when its scoring speed differs from a short-format highlight. Consider the wickets lost, the time available and the partnership situation. Do not judge every innings by the expectations of a six-over tournament or a Twenty20 chase.

To practise, compare two hypothetical batters with the same runs but different balls faced. The numbers tell you their scoring rates differ. They do not alone tell you which innings served its match situation better. That assessment needs the conditions and the team's task, not just one ratio.

Read bowling figures in their stated order

Bowling figures often include overs, maidens, runs conceded and wickets. A compact entry such as 12-3-30-2 usually describes twelve overs, three maidens, thirty runs conceded and two wickets, but check the column headings before relying on a familiar format.

Do not treat a run-out as a bowler's wicket unless the statistical record credits it that way under the relevant category. Team dismissals and individual bowling wickets are related but different records. The scorecard supplies the official allocation and should guide a statistical explanation.

For an educational comparison, look at both workload and outcome. Two wickets in a long spell and two in a short spell do not describe identical workloads. Economy, strike rate and average answer different questions. A useful analysis explains which measure it is using instead of calling every low number automatically better.

Series pressure and World Test Championship context

The series result and the championship standings are separate layers. A two-match series can be levelled, won or lost, while each Test also contributes under the championship's points system. Do not replace one record with the other or assume that a series lead directly equals a championship position.

For current championship rank, use the official table and its methodology. Teams can have played different numbers of matches, so a raw count of wins may not explain the displayed order. Check the published percentage or other applicable metric rather than inventing a table from a few remembered results.

The ICC's September scheduling article contains standings context from the time it was written. That historical context should not be presented as a fresh 5 November table. An official publisher can carry an older valid snapshot; the date still matters when you use it.

Weather, light and interruptions

The scheduled venue is Sylhet, so a forecast for a different Bangladeshi city is not automatically useful. Even a relevant forecast is a forecast, not confirmation that play has stopped. Use the match service's current status for actual interruptions.

If a score remains unchanged, check whether the page has refreshed and whether play is paused for an interval, weather, light or another announced reason. A stalled browser tab is not itself evidence of rain. Distinguish a connection problem from an official match-status update.

Do not announce a draw merely because an early session is interrupted. The remaining time and completed play matter. Equally, do not promise that every scheduled over will be recovered. Report the announced arrangement rather than replacing uncertainty with an invented guarantee.

Follow the correct score without unsafe downloads

Use board, competition or established broadcaster services, and verify the fixture title and date before opening commentary. A search for the two countries can return an older Test, a limited-overs game or a replay. Those records may be accurate while answering a different question.

You should not need to install an unknown extension to read an ordinary scorecard. Be cautious with sites that demand unrelated account credentials or a payment to unlock basic match information. Open a known service independently instead of following an unexpected message claiming that a stream has moved.

Our New Zealand versus India first-ODI guide provides a useful format comparison. Keep ODI concepts and Test concepts separate: a target calculation, innings sequence or weather rule should be applied only in the format and circumstances for which it is relevant.

A short scorecard exercise

Take the hypothetical 250 and 220 first-innings totals above. Write the lead, then add an imaginary second innings of 170. Work out the final chase target and explain why it is one more than the overall lead. Label every number as an example so it cannot be mistaken for the current match.

Next, convert 15.4 overs into legal balls. Fifteen completed overs contain ninety balls, and four more make ninety-four. Now explain why multiplying 15.4 by six as an ordinary decimal gives an inappropriate result for cricket notation.

Finally, describe the real series situation without inventing a live score: Bangladesh entered the second Test 1-0 down, and the published itinerary schedules it in Sylhet from 5 November. That sentence is useful because each element has a dated source and none depends on guessing what happened after publication.

Questions readers are asking

Is this the first or second Test?

It is the second Test of the published two-match series. The first was scheduled from 28 October in Mirpur. Use the match number and venue when choosing a scorecard so that the previous result is not mistaken for the ongoing fixture.

Does 1-0 describe the innings score?

No. In this context it describes the series position reported before the second Test. An innings score uses runs and wickets, while a series result counts completed match wins. The surrounding label tells you which kind of number you are reading.

Is every squad member in the playing eleven?

No. A squad includes the selected group, while the playing eleven is separately named for the match. Check the official team announcement before treating a squad replacement as a confirmed starter or assigning a batting position.

Does this article provide a live result?

No. It provides the verified schedule, pre-match series context and scorecard guidance. Check the official current match service for live play. A responsible guide should state the limit of its information rather than manufacture a score to appear more current.

Sources

• ICC official series schedule
• ICC second-Test squad and series update
• West Indies official fixtures and results
• Cricket laws and terminology

Image credits: cover: Nothingbd, source, CC BY-SA 4.0. Resized and converted to WebP. inline: Panthus, source, CC0. Resized and converted to WebP.